AMX MIO-R1-AUDIO príručka

(1)
  • Quick Start Guide
    MIO R-1 AUDIO Tango Distributed Audio Remote Control
    Overview
    The MIO R-1 AUDIO (FG147-04) remote provides custom control features, contained
    in an elegant handheld device, designed specifically for use with Matrix Distributed
    Audio Systems using Metreau DAS-MET-6SRC keypads.
    The MIO R-1 AUDIO controls up to 8 different devices or Sources.
    Specifications
    Installing Custom Buttons
    1. Flip and turn the MIO R-1 AUDIO so that the buttons are facing away from you
    and the device is upside down.
    2. Holding the device in both hands, place your thumbs on the battery door and
    push up to slide the battery door free.
    3. Unscrew the 6 screw points indicated in FIG. 2.
    4. Turn the unit over so the buttons are facing you.
    5. Lift the top assembly away from the PCB.
    6. If necessary, push out the standard buttons from the front of the top assembly.
    7. Drop on your custom button pad and verify the alignment with the guide posts on
    the PCB.
    8. Place the top assembly back down on the PCB and return the unit over, expos-
    ing the 6 screw points.
    9. Tighten the 6 screw points.
    10. Place the battery door back on the device, slide to lock it in place.
    Inserting Batteries into The MIO R-1 AUDIO
    To install your 4 AAA batteries into the MIO R-1 AUDIO:
    1. Flip and turn the MIO R-1 AUDIO so that the buttons are facing away from you
    and the device is upside down.
    2. Holding the device in both hands, place your thumbs on the battery door and
    slide the battery door free.
    3. Insert the batteries as indicated inside the battery compartment.
    4. Place the battery door back on the device, slide to lock it in place.
    Battery Low Indicator
    When the battery charge level is too low to sustain continuous operation, the LCD
    flashes, "Battery Low" and the device shuts down.
    Programming The MIO R-1 AUDIO Using KeypadBuilder
    The MIO R-1 AUDIO comes pre-customized with appropriate labels, which in most
    cases should not be changed. However, if in your installation you intend to use the
    MIO R-1 AUDIO with a NetLinx Controller and Metreau AxLink keypads (for more than
    just Audio), you could customize your buttons in the KeypadBuilder application. The
    application and documentation are available from www.amx.com.
    There are a select number of Serial Commands the MIO R-1 AUDIO recognizes. For a
    full list and descriptions, consult the MIO R-1 AUDIO Operation/Reference Guide.
    The Programming Jack is used for communication between the device and
    KeypadBuilder. The programming jack uses a three-wire, 2.5 mm stereo jack, you can
    order the programming cable (FG10-817) from AMX if you do not currently possess
    one. While loading your configuration file make sure the device is situated as such that
    the batteries will not fall out. The load will fail if your batteries fall out during the
    process. The MIO communicates at 115200 baud rate.
    Refer to the MIO R-1 AUDIO Operation/Reference Guide for instructions on using the
    Programming Jack to load configuration files on the MIO R-1 AUDIO.
    Tone Control & SRS Setting
    To access the Tone Control and SRS settings, press the TONE button. This enables
    the Tone Control Mode with BASS as the first mode selected. There are 3 Tone
    Control Modes available for adjustment, and 4 SRS options, as follows:
    BASS: Increase / Decrease from -10dB to +10dB (Up/Down NAV buttons)
    Treble: Increase / Decrease from -10dB to +10dB (Up/Down NAV buttons)
    Balance: Left / Right (Up NAV button = right, Down NAV button = left)
    SRS options: BASS Boost, Focus, 3D, WOW
    The Source buttons on the Metreau keypad provides visual feedback as to which
    mode it is currently in. The following sources will light based on the current mode:
    Source 1 = BASS
    Source 2 = Treble
    Source 3 = Balance
    Source 4 = SRS
    When first entering Tone Control Mode, BASS mode is active (Source 1 LED is lit). To
    move from mode to mode, select the Center NAV button. This saves the setting and
    moves to the next mode.
    FIG. 1
    MIO R-1 AUDIO remote controller
    MIO R-1 AUDIO Specifications
    Power Requirements: 4 AAA Alkaline Batteries (included) - approx. 5 hours battery life
    Transmission
    Frequencies
    AMX 38 KHz/455 KHz IR
    Note: The Metreau MET-6N keypads only support 38 KHz. When used
    with MET-6N keypads, the MIO R-1 AUDIO must be set to 38 KHz.
    Transmission
    Range (distance)
    with MIO IR Receiver
    100 feet at 38KHz
    50 feet at 455KHz
    Transmission
    Range (angle)
    140 degrees (+/-70° from perpendicular) horizontally from an axis
    extending from the end of the remote.
    40 degrees (+/-20° from perpendicular) vertically from an axis
    extending from the end of the remote.
    Top Components LED - blue backlit buttons indicate device is awake
    Display (OLED) - 128 x 32 pixels, active area is 29.42mm x 7.98mm
    Pushbuttons - the power button is red backlit; the rest are blue backlit
    buttons. 45 buttons; 9 custom buttons (3 macro and 6 device).
    Rear Component Programming Port - 2.5 mm stereo female conductor jack
    Battery Door
    Dimensions (HWD) 9.50 x 2.00 x .74 (241.3 mm x 50.8 mm x 18.80 mm)
    Weight .45 lbs (20 kg) without batteries
    .55 lbs (25 kg) with batteries
    Operating Environment: Operating Temperature: 0° to 50° C (32° to 122° F)
    Storage Temperature: -10° to 70° C (14° to 158° F)
    Included Accessories: 4 AAA Batteries
    Other AMX Equipment DB-9 extension cable (FG10-727)
    Programming Cable - a 3 wire, 2.5 mm stereo jack (FG10-817)
    Custom engraving (FG147-01)
    MIO-RCC Kit (FG147-03K)
    MIO-RCC Charging Base (FG147-02)
    MIO-RBP Rechargeable Lithium Ion Battery (FG147-10)
    MIO Modero IR Receiver (FG5797-01xx; xx indicates color)
    Power
    IR Transmitting
    Battery Meter
    Source Select Options
    1
    2
    3
    4
    5
    6
    7
    8
    9
    10
    11
    12
    13
    14
    15
    16
    26
    28
    41
    42
    43
    44 45
    Numeral Keypad
    1 - Power
    2 - Alarm
    3 - Favorite
    4 - Privacy
    5 - Lock
    6 - NAV Up
    7 - NAV Down
    8 - NAV Left
    9 - NAV Right
    10 - NAV Center
    11 - Volume Up
    12 - Volume Down
    13 - NAV Up
    14 - NAV Down
    15 - Group
    16 - Preset
    26 - “ • “ (dot)
    28 - Enter
    41 - NAV Left
    42 - Tone Controls/SRS options
    43 - NAV Right
    44 - NAV Up
    45 - NAV Down
    38 - Configuration (press and
    hold with the “Dot” button (#26)
    to access Configuration options)
    38
    FIG. 2 6 screwpoints (battery compartment cover removed)
    1
    2
    3
    4
    5
    6

Máte otázku týkajúcu sa AMX MIO-R1-AUDIO?

Počet otázok: 0

Tu sa jednoducho opýtajte na otázku, ktorú máte ohľadom AMX MIO-R1-AUDIO od ostatných vlastníkov produktov. Poskytnite jasný a komplexný popis problému a vašej otázky. Čím bude lepšie opísaný váš problém a otázka, tým ľahšie bude pre ostatných AMX MIO-R1-AUDIO vlastníkov, poskytnúť vám správnu odpoveď.

Tu si zobrazte bezplatne AMX MIO-R1-AUDIO príručku. Už ste si prečítaly príručku, ale nezodpovedala vám vašu otázku? Položte svoju otázku na tejto stránke ostatným AMX MIO-R1-AUDIO vlastníkom. Tu položte otázku

Produktové špecifikácie

Všeobecné
Značka AMX
Model MIO-R1-AUDIO
Výrobok Diaľkový ovládač
Jazyk Angličtina
Typ súboru PDF
Výkon
Počet podporovaných zariadení 1
Maximálny dosah -m
Dizajn
Rozhranie IR Wireless
Farba Čierna
Správne použitie diaľkového ovládania Audio
Typ ovládania Tlačidlá
Prispôsobiteľné tlačidlá
Počet tlačidiel 45
Podsvietené tlačidlá
Obrazovka
Vstavaný displej
Displej OLED
Rozlíšenie displeja 128 x 32
Hmotnosť a rozmery
Šírka 51mm
Hĺbka 19mm
Výška 241mm
Hmotnosť 200g
Batérie
Nabíjateľný
Typ batérie Alkalický
Typ batérie AAA
Životnosť batérie (max.) 5h
Počet podporovaných batérií 4
Prevádzkové prostredie
Prevádzkový rozsah teplôt (T-T) 0 - 50°C
Rozsah teplôt pri skladovaní (T-T) -10 - 70°C
Obsah balenia
Vrátane batérií

príručky.sk

Hľadáte príručku? príručky.sk zaistí, že nájdete príručku, ktorú hľadáte, ihneď. Naša databáza obsahuje viac ako 1 milión PDF príručiek od viac ako 10 000 značiek. Každý deň pridávame najnovšie príručky, aby ste vždy našli produkt, ktorý hľadáte. Je to veľmi jednoduché: stačí do vyhľadávacieho panela napísať názov značky a typ produktu a okamžite si môžete bezplatne a online prezrieť príručku podľa svojho výberu.

príručky.sk

© Autorské práva 2020 príručky.sk. Všetky práva vyhradené.