AMX MVP-TCS-52-GW príručka

(1)
  • Installation Guide
    MVP-TCS-52 Table Charging Station
    For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
    1/08
    ©2008 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX.
    AMX reserves the right to alter specifications without notice at any time.
    3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
    93-5966-02 REV: A
    Overview
    The MVP-TCS-52 Table Charging Station (FG5966-1X) is both a charging
    station and a direct power connection for the MVP-5200i Modero
    ®
    Viewpoint
    ®
    Widescreen Touch Panel. The charging station is available in either white
    (FG5966-11) or black (FG5966-10). For more information, please refer to the
    Accessories section of the MVP-5200i Modero Viewpoint Widescreen Touch
    Panel User Manual, available at www.amx.com.
    Specifications
    Powering the MVP-TCS-52
    The MVP-TCS-52 uses a PS3.0 power supply to provide direct power for the
    MVP panel both for standard function and for charging its internal battery.
    1. Turn the device upside down and connect the terminal end of the PS3.0
    power supply to the PWR connector on the bottom of the MVP-TCS-52.
    2. To prevent wear on the power supply cord and assure that the device’s
    base is in full contact with the table surface, press the cord into the locking
    groove running across the bottom of the device (FIG. 2).
    3. Provide power to the MVP-TCS by connecting the PS3.0 cord to an
    external power source.
    4. Place the touch panel in the Charging Station cradle (FIG. 3), guiding it into
    place with the locking grooves on each side of the cradle (FIG. 4). When
    fully seated, the touch panel’s charging station connector should be in
    contact with the Charging Station’s charger pins.
    Recharging
    To recharge the MVP-5200i, slide the device into the Table Charging Station
    cradle bottom-first and make sure the device is fully seated in the Charging
    Station. The charger pins in the bottom of the cradle (FIG. 4) must be in contact
    with the connector on the bottom of the MVP-5200i for it to start recharging. The
    MVP panel will stop recharging automatically once the battery has achieved its
    maximum charge.
    Cleaning the MVP-TCS-52
    You should clean the Table Charging Station after each day’s use to maintain the
    device’s appearance. Always use a clean cotton cloth and a spray bottle
    containing water or a vinegar-based cleaner, as alcohol-based cleaners can
    damage the device. Do not directly spray the device: instead, spray the cloth to
    prevent moisture from collecting on the charger pins. Do NOT use an abrasive of
    any type to clean the Table Charging Station, as this may permanently damage
    or remove the device’s finish.
    FIG. 1 MVP-TCS-52 Table Charging Station (FG5966-10)
    MVP-TCS-52 Specifications
    Dimensions
    (HWD):
    8.0” x 4.75” x 3.5” (20.32cm x 12.07cm x 8.89cm)
    Weight: .65 lbs (.29 kg)
    Rear Connector: 12-pin charging connector on bottom of device cradle.
    Operating/
    Storage
    Environments:
    Operating Temperature: 0° C (32° F) to 40° C (104° F)
    Operating Humidity: 20% - 85% RH
    Storage Temperature: -20° C (-4° F) to 60° C (140° F)
    Storage Humidity: 5% - 85% RH
    Included
    Accessories
    MVP-TCS-52 Table Charging Station Installation Guide
    (93-5966-02)
    PS3.0 Power Supply (FG423-30)
    Other AMX
    Equipment:
    MVP-5200i Modero Viewpoint Widescreen Touch Panel -
    Gloss Black (FG5966-01)
    MVP-5200i Modero Viewpoint Widescreen Touch Panel -
    Gloss White (FG5966-02)
    MVP-WCS-52: Wall Charging Station (FG5966-1X)
    FIG. 2
    Power source cable path for bottom of MVP-TCS-52
    Power source cable path
    Bottom of Charging Station
    PWR connector location
    Front of Charging Station
    FIG. 3 MVP-TCS-52 - Front view with MVP-5200i
    FIG. 4 MVP-TCS-52 - Rear view
    MVP-5200i device
    Table Charging
    Charging Station
    rear support
    Station
    Charger pins
    Charging Station cradle
    Locking groove

Máte otázku týkajúcu sa AMX MVP-TCS-52-GW?

Počet otázok: 0

Tu sa jednoducho opýtajte na otázku, ktorú máte ohľadom AMX MVP-TCS-52-GW od ostatných vlastníkov produktov. Poskytnite jasný a komplexný popis problému a vašej otázky. Čím bude lepšie opísaný váš problém a otázka, tým ľahšie bude pre ostatných AMX MVP-TCS-52-GW vlastníkov, poskytnúť vám správnu odpoveď.

Tu si zobrazte bezplatne AMX MVP-TCS-52-GW príručku. Už ste si prečítaly príručku, ale nezodpovedala vám vašu otázku? Položte svoju otázku na tejto stránke ostatným AMX MVP-TCS-52-GW vlastníkom. Tu položte otázku

Produktové špecifikácie

Všeobecné
Značka AMX
Model MVP-TCS-52-GW
Výrobok Nabíjačka pre mobilné zariadenie
Jazyk Angličtina
Typ súboru PDF
Výkon
Typ nabíjačky Vnútorný
Kompatibilné nabíjačky Tablet
Typ zdroja AC
Kompatibilita MVP-5200i\r
MVP-5150\r
MVP-5100
Ďalšie vlastnosti
Konektor(y) 12-pin
Zabudovaný akumulátor
Prevádzkové prostredie
Prevádzkový rozsah teplôt (T-T) 0 - 40°C
Dizajn
Farba Biela
Sila
Certifikácia Energy Star -
Hmotnosť a rozmery
Šírka 120.7mm
Hĺbka 88.9mm
Výška 93.2mm
Hmotnosť 290g

príručky.sk

Hľadáte príručku? príručky.sk zaistí, že nájdete príručku, ktorú hľadáte, ihneď. Naša databáza obsahuje viac ako 1 milión PDF príručiek od viac ako 10 000 značiek. Každý deň pridávame najnovšie príručky, aby ste vždy našli produkt, ktorý hľadáte. Je to veľmi jednoduché: stačí do vyhľadávacieho panela napísať názov značky a typ produktu a okamžite si môžete bezplatne a online prezrieť príručku podľa svojho výberu.

príručky.sk

© Autorské práva 2020 príručky.sk. Všetky práva vyhradené.