accessory for use with the Modero X Series Touch Panels. The handset allows
wireless Bluetooth audio communication through the touch panel, while the handset’s
Charging Cradle allows recharging either with a USB connection to the touch panel or
via the included electrical adapter.
Safety and Battery Charging Information
•Do not dismantle, open, or shred the battery.
•Do not short-circuit the battery. Do not store batteries haphazardly in a box or
drawer where they may short-circuit each other or be short-circuited by conduc-
•Do not remove a battery from its original packaging until required for use.
•Do not expose batteries to heat or fire. Avoid storage in direct sunlight.
•Do not subject the batteries to mechanical shock.
•In the event of a cell leaking, do not allow the liquid to come in contact with the
skin or eyes. If contact has been made, wash the affected area with copious
amounts of water and seek medical advice.
•Equipment should be designed to prohibit the incorrect insertion of the battery
and its connector.
•Store the batteries in a dry place with the temperature between 32° F (0° C) and
104° F (40° C).
•Secondary batteries give their best performance when they are operated at
normal room temperature: 68° F +/- 5° (20° +/- 5° C).
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
•Use only with approved charger.
•Charge with a constant-voltage, constant-current battery charger circuit with the
Maximum charge voltage: 5.2 +/- 0.5 VDC
Maximum charge current: 120 mA
Charging temperature range: 2.5 deg C to 37.5 deg C (+/- 2.5 deg C)
•When disposing of batteries, keep cells or batteries of different electrochemical
systems separate from each other.
•Recycle or dispose of this battery in accordance with local regulations.
1.When this crossed-out wheeled bin symbol is attached to a product, it means
the product is covered by the European Directive 2002/96/EC.
2.All electrical and electronic products/battery should be disposed of separately
from the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.
3.The correct disposal of your old appliance/battery will help prevent potential
negative consequences for the environment and human health.
For more detailed information about disposal of your old appliance/battery, please
contact your city office, waste disposal service or the shop where you purchased the
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Indicator Light Status
The indicator light on the back of the MXA-HST (FIG. 1) flashes and changes color
based on the handset’s current status.
Power Requirements:DC 5V, 500mA
Bluetooth Specification:v2.1+EDR Class 2
Headset v1.2, HandsFree v1.5
Range of Frequency:2.4GHz Spectrum
Nominal Charging Time:Within 8 hours
Talk Time:Up to 35 hours
Standby Time:Up to 200 hours
•Handset: 6.88” x 1.62” x 0.77” (17.46 cm x 4.12 cm x
•Charging Cradle: 1.93” x 3.64” 3.01” (5.06 cm x 9.25
cm x 7.65 cm)
•Handset: 0.2 lbs (90.72 g)
•Charging Cradle: 0.2 lbs (90.72 g)
•FCC part 15 Class A
Other AMX Equipment:•MXA-IPA International Power Adapter Accessory Kit
MXA-BT Bluetooth USB Adaptor (FG5968-19)
Indicator Light Status
Handset StatusIndicator Light
Charging (OFF STATE)Solid blue
Fully Charged (OFF STATE)Solid white
Charging (ON STATE)Solid blue, flash white every 10 seconds
Fully Charged (ON STATE)Solid white, flash white every 10 seconds
Low BatteryFlash red with beep every minute
Out of ChargeIndicator light turns off
Out of RangeSolid blue for 5 seconds
Máte otázku týkajúcu sa AMX MXA-HST?
Počet otázok: 0
Tu sa jednoducho opýtajte na otázku, ktorú máte ohľadom AMX MXA-HST od ostatných vlastníkov produktov.
Poskytnite jasný a komplexný popis problému a vašej otázky. Čím bude lepšie opísaný váš problém a otázka, tým ľahšie bude pre ostatných AMX MXA-HST vlastníkov, poskytnúť vám správnu odpoveď.
Informácie o AMX MXA-HST
Tu si zobrazte bezplatne AMX MXA-HST príručku. Už ste si prečítaly príručku, ale nezodpovedala vám vašu otázku? Položte svoju otázku na tejto stránke ostatným AMX MXA-HST vlastníkom. Tu položte otázku