Anthro Fit Console Unit príručka
RQuestions?1-800-325-3841AnthroCorporation Technology Furniture®10450 SW Manhasset Drive Tualatin, Oregon 97062 anthro.comSAVE THESE INSTRUCTIONS!Rev. F January 2006Hello! Thank you for choosing Anthro.Before beginning assembly of your Console Unit, take a moment to review the parts listed on the next pageto verify that your shipment is complete.Please review the assembly instructions of all Anthro products youpurchased and are planning to include in this installation, prior to beginning this assembly.Your Console Unit is heavy!A second person will be needed for this assembly procedure.To make the assembly of your Console Unit even easier, we have included all of the required tools. The handyHex Driver Bit can be used in your electric drill in place of the Hex Driver.Hex Driver5/32”............................................................375-5000-00Hex Driver Bit5/32”.....................................................375-5003-00Hex Key5/32”.................................................................375-5016-00Hex Key1/4”..................................................................375-5024-003-Way Wrench.............................................................225-5196-038 oz. Rubber Mallet.....................................................375-5022-00Console UnitAssembly Instructions1-800-325-3841Step 15Begin by placing the Base Tube Assembly(Locking Castersas shown)onto the Vertical Legs.Attach the Base Tubes to each Leg by inserting afi tBolt through a Tube Washer, then insert thefi tBoltthrough the Base Tube and carefully thread intoeach Vertical Leg.Tighten allfi tBolts and Cap Screws.Step 16(uses the1/8” Hex Key)Carefully rotate your Console Unit onto the Casters.Pop the six Small End Caps into the Leg ends.Congratulations!Your assembly is complete.(5/16-18 X 3.5”)fi tBolt325-5194-00fi tTube Washer225-2050-00 or 225-3522-00fi t Tube Washerfi t Tube WasherLocking CastersSmall End CapsAdjust the Caddy Shelf height by:1. Squeezing and holding the Paddle.2. Reposition the Caddy to the desired location.3. Release the Paddle.Rotate Knob toadjust Caddyangle.Squeeze Paddleto adjust Caddyheight.angle.Adjust the Caddy Shelf angle by:1. Rotating the Knob counterclockwise.2. Reposition the Caddy to the desired angle.3. Rotate the Knob clockwise.Adjusting your Console Caddy
Máte otázku týkajúcu sa Anthro Fit Console Unit?
Počet otázok: 0Tu sa jednoducho opýtajte na otázku, ktorú máte ohľadom Anthro Fit Console Unit od ostatných vlastníkov produktov. Poskytnite jasný a komplexný popis problému a vašej otázky. Čím bude lepšie opísaný váš problém a otázka, tým ľahšie bude pre ostatných Anthro Fit Console Unit vlastníkov, poskytnúť vám správnu odpoveď.
Informácie o Anthro Fit Console Unit
+3
Tu si zobrazte bezplatne Anthro Fit Console Unit príručku. Už ste si prečítaly príručku, ale nezodpovedala vám vašu otázku? Položte svoju otázku na tejto stránke ostatným Anthro Fit Console Unit vlastníkom. Tu položte otázku
Produktové špecifikácie
Hmotnosť a rozmery
| Rozmery (š x h x v) | 1930.39 x 1149.35 x 787.4 mm |
| Šírka | 1930.39 mm |
| Hĺbka | 1149.35 mm |
| Výška | 787.4 mm |
Dizajn
| Maximálna váha (kapacita) | 68 kg |
| Farba | Čierna |
Ergonómia
| Výťah | 0 cm |
| Uhol náklonu | 0 ° |
| Uhol rotácie | 360 ° |
| Kompatibilné s VESA úchytom na stenu | Nie mm |
