CyberPower CPBC5200AC príručka

(1)
  • PACKAGE CONTENTS
    • USB Battery Pack (CPBC5200AC Series)
    • User Guide
    SPECIFICATIONS
    Battery Capacity: 5200mA
    Rated Input: AC 100~240V, 50/60Hz 0.4A
    Rated Output: DC 5V 2.1A (Max.)
    PC Charging time: ~6 Hours
    Dimension: 4.26x2.2x0.96 inch
    Weight: 5.93 oz
    Environment:
    Storage: 14 to 122°F (-10 to 50°C)
    Operation: 32 to 104˚F (0 to 40˚C)
    SUGGESTED - PRIOR TO FIRST USE:
    It is recommended that you charge
    your CPBC5200AC Series battery pack for
    10 hours to insure a full charge.
    CHARGING THE BATTERY PACK
    Charge the USB Battery Pack by putting the plug into an AC
    socket. When charging the battery pack, the LED indicator will
    light up automatically. Press the button to turn it off and press
    it again to switch the LED indicator on. Recharge the
    CPBC5200AC Series every 3 months when not in use to
    maintain peak battery performance. The battery capacity may
    decline after 300 charging cycles.
    SAFETY PRECAUTION
    Before using the USB Battery Pack, please read the following
    warnings carefully. Use the product according to the
    procedures described in this manual. Failure to follow these
    safety precautions may result in fire, explosion, electrical shock
    or other dangers
    1. Store between 14 to 122°F (-10 to 50°C).Operate between
    32 to 104°F(0 to 40°C).
    2. Do not immerse this product in water or other liquids, as
    such use may result in fire or electrical shock. If water or
    other liquids enter the battery interior, unplug the product
    immediately from any attached power source or device. 
    3. Do not use this product with wet hands. Moisture in or on
    this product may result in electrical shock.
    4. Store this product in a cool and dry environment when not in use.
    5. Do not puncture this product. Puncturing the battery may
    cause the release of harmful substances.
    6. It is normal for the USB Battery Pack to become warm
    during charging.
    7. Ensure that all users read these warnings and instructions
    before using.
    8. Please recycle USB Battery Pack in accordance with local
    environmental laws and regulations
    9. Do not dismantle, open or shred secondary cells or batteries.
    10. Do not expose cells or batteries to heat or fire. Avoid storage
    in direct sunlight.
    11. Do not short-circuit a cell or a battery. Do not store cells or
    batteries haphazardly in a box or drawer where they may
    short-circuit each other or be short-circuited by other metal
    objects.
    12. Do not remove a cell or battery from its original packaging
    until required for use.
    13. Do not subject cells or batteries to mechanical shock.
    14. In the event of a cell leaking, do not allow the liquid to come
    in contact with the skin or eyes. If contact has been made,
    wash the affected area with copious amounts of water and
    seek medical advice.
    15. Do not use any charger other than that specifically provided
    for use with the equipment.
    16. Observe the plus (+) and minus (–) marks on the cell, battery
    and equipment and ensure correct use.
    17. Do not use any cell or battery which is not designed for use
    with the equipment.
    18. Do not mix cells of different manufacture, capacity, size or
    type within a device.
    19. Keep cells and batteries out of the reach of children.
    20. Seek medical advice immediately if a cell or a battery has
    been swallowed.
    21. Always purchase the correct cell or battery for the equipment.
    22. Keep cells and batteries clean and dry.
    23. Wipe the cell or battery terminals with a clean dry cloth if
    they become dirty.
    24. Secondary cells and batteries need to be charged before
    use. Always use the correct charger and refer to the
    manufacturer’s instructions or equipment manual for proper
    charging instructions.
    25. Do not leave a battery on prolonged charge when not in use.
    26. After extended periods of storage, it may be necessary to
    charge and discharge the cells or batteries several times to
    obtain maximum performance.
    27. Secondary cells and batteries give their best performance
    when they are operated at normal room temperature (20
    °C ± 5 °C).
    28. Retain the original product literature for future reference.
    29. Use only the cell or battery in the application for which it
    was intended.
    30. When possible, remove the battery from the equipment
    when not in use.
    31. Dispose of properly.
    LEGAL NOTICES
    FCC Part 15
    This equipment has been tested and found to comply with the
    limits for a Class B digital device, pursuant to Part 15 of the FCC
    rules. These limits are designed to provide reasonable protection
    against harmful interference in a residential installation. This
    equipment generates uses and can radiate radio frequency
    energy and if not installed and used in accordance with the
    instructions, may cause harmful interference to radio
    communications. However, there is no guarantee that
    interference will not occur in a particular installation. If this
    equipment does cause harmful interference to radio or television
    reception, which can be determined by turning the equipment off
    and on, the user is encouraged to try to correct the interference
    by one or more of the following measures:
    • Reorient or relocate the receiving antenna.
    – Increase the separation between the equipment
    and receiver.
    – Connect the equipment into an outlet on a circuit different
    from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV
    technician for help.
    If the LED indicator extinguishes automatically during the
    charging process, press the button to revert.
    FCC WARNING
    Changes or modifications not expressly approved by the
    party responsible for compliance with the FCC Rules could
    void the user’s authority to operate this equipment.
    LIMITED PRODUCT WARRANTY
    CyberPower offers limited product warranty for the hardware
    of the USB Battery Pack and the product is free from material
    and manufacturing defects for one year. A reasonable
    purchase proof with date must be provided when submission.
    CyberPower's sole responsibility is to repair or replace the
    product if a material or manufacturing defect results in
    product failure during its normal use. The warranty is void if
    the product is damaged due to abuse, alteration, misuse,
    negligence, incorrect voltage supply, air/water pollution,
    accidents and natural disasters.
    INTRODUCTION
    The USB Battery Pack (CPBC5200AC Series) is a high
    capacity rechargeable lithium battery designed for
    powering up to two mobile devices such as phones, MP3
    players, tablets, and handheld gaming devices while away
    from other power sources
    FEATURES
    - Compact and portable design
    - Dual output
    - Built in AC plug
    - Battery life indicator
    PRODUCT VIEW:
    © 2013 CyberPower Systems, Inc.
    All rights reserved. Reproduction in whole or in part without permission is prohibited.
    USB BATTERY PACK
    USER GUIDE
    Model: CPBC5200AC Series
    TROUBLE SHOOTING
    K09-0000172-00
    POWER
    YOUR DEVICES
    CHARGING THE
    POWER PACK
    PAD
    ITEMNO. DESCRIPTION
    1
    2
    3
    4
    5
    Power on/ LED Indicator Switch
    Power Off
    LED Battery Life lndicator
    USB Output Port 1*
    USB Output Port 2
    AC Input Plug
    Press the button
    Press and hold for 3 seconds
    As the “LED INDICATOR”
    table showing
    5V/ 2.1A (Max.) USB output
    AC 100~240V, 50/60Hz, 0.4A
    CONDITIONNO. LED INDICATION
    1
    2
    3
    Battery Life Indicator
    Overload
    Low Battery
    Four LEDs represent 25%,
    50%, 75% and 100% battery
    life from left to right side.
    All four LEDs flash simultaneously.
    The first LED light flashes rapidly.
    LED INDICATOR
    Problem Possible Cause Solution
    USB Battery
    pack does
    not recharge
    1.Incorrect connection
    between charger and
    USB Battery Pack.
    2.No power from the
    source.
    Re-attach the USB connector
    to the socket.
    Check that power is provided
    Problem Possible Cause Solution
    USB Battery
    Pack does
    not power
    the device
    1.The device is drawing
    too much power.
    2.The battery is out
    of power
    Check the power specification
    of the device before charging
    with the CPBC5200AC Series.
    Charge the battery pack.
    *Charge tablets and Apple devices through USB Output Port 1 to achieve fast charging.
    1
    2
    3
    4
    5
    Note:
    1. The LED indicator will automatically switch off 5 seconds
    after pressing the button.
    2. When the battery pack is connected to the power, the LED
    indicator will light indicating the charging status. Press the
    button to switch off the indicator and press the button again
    to switch it back on.
    CyberPower Systems (USA), Inc.
    4241 12th Avenue East, Suite 400, Shakopee, MN 55379, U.S.A.
    TEL: (952) 403-9500 Toll-Free: (877) 297-6937
    FAX: (952) 403-0009 E-mail: tech@cpsww.com
    CPSww.com

Máte otázku týkajúcu sa CyberPower CPBC5200AC?

Počet otázok: 0

Tu sa jednoducho opýtajte na otázku, ktorú máte ohľadom CyberPower CPBC5200AC od ostatných vlastníkov produktov. Poskytnite jasný a komplexný popis problému a vašej otázky. Čím bude lepšie opísaný váš problém a otázka, tým ľahšie bude pre ostatných CyberPower CPBC5200AC vlastníkov, poskytnúť vám správnu odpoveď.

Tu si zobrazte bezplatne CyberPower CPBC5200AC príručku. Už ste si prečítaly príručku, ale nezodpovedala vám vašu otázku? Položte svoju otázku na tejto stránke ostatným CyberPower CPBC5200AC vlastníkom. Tu položte otázku

Produktové špecifikácie

Všeobecné
Značka CyberPower
Model CPBC5200AC
Výrobok Batéria
EAN 27242636095, 649532610280, 6495326102806
Jazyk Engels
Typ súboru PDF
Vlastnosti
Kapacita batérie 5200 mAh
Typ batérie -
Napätie batérie 3.7 V
Farba Čierna
Výstupný prúd 0.4 A
Certifikácia TUV/FCC/CE
Batérie
Nabíjací čas batérie (vypnuté) 6 h
Technické detaily
RoHS
RoHS
Prevádzkové prostredie
Prevádzkový rozsah teplôt (T-T) 10 - 40 °C
Rozsah teplôt pri skladovaní (T-T) -10 - 50 °C
Prevádzkový rozsah teplôt (T-T) 10 - 40 °C
Rozsah teplôt pri skladovaní (T-T) -10 - 50 °C
Hmotnosť a rozmery
Šírka 55.8 mm
Hĺbka 108.2 mm
Výška 24.3 mm
Hmotnosť 167.8 g
Šírka 55.8 mm
Hĺbka 108.2 mm
Výška 24.3 mm
Hmotnosť 167.8 g
Údaje o balení
Množstvo 1
Množstvo v balení 1 kusov
Výkon
Kapacita batérie 5200 mAh
Typ batérie -
Napätie batérie 3.7 V
Dizajn
Farba Čierna
Certifikácia TUV/FCC/CE
Sila
Výstupný prúd 0.4 A

príručky.sk

Hľadáte príručku? príručky.sk zaistí, že nájdete príručku, ktorú hľadáte, ihneď. Naša databáza obsahuje viac ako 1 milión PDF príručiek od viac ako 10 000 značiek. Každý deň pridávame najnovšie príručky, aby ste vždy našli produkt, ktorý hľadáte. Je to veľmi jednoduché: stačí do vyhľadávacieho panela napísať názov značky a typ produktu a okamžite si môžete bezplatne a online prezrieť príručku podľa svojho výberu.

príručky.sk

© Autorské práva 2021 príručky.sk. Všetky práva vyhradené.