Metra AX-ADCT4 príručka

(1)
  • ADCT4
    44 CChhaannnneell,, AAddjjuussttaabbllee,,
    LLiinnee OOuuttppuutt CCoonnvveerrtteerr ((LLOOCC))
    wwiitthh BBuuiilltt--iinn AAmmpplliiffiieerr RReemmoottee GGeenneerraattoorr
    The ADCT4 is is designed to convert 4 channels of speaker level audio into 4 channels of line level audio
    that can be used by OEM amplifiers. It can also be used with OEM radios to add aftermarket amplifiers;
    the optional DC4-RCA harness is required. This device will also detect the presence of an audio signal and
    then generate a +12V output (verified by an illuminated LED) that can be used to turn-on an aftermarket
    amplifier.
    Features & Specifications: : The ADCT4 is able to handle 80 watts per channel continuous input with-
    out over heating. The input circuitry is designed to correct the crossover distortion commonly found on
    standard LOCs while providing a high to low level step down of 6:1. Output audio level is infinitely
    adjustable using the onboard, high quality potentiometers. The remote output or amplifier trigger is rated
    at 500mA (+12V) and will easily handle an outboard relay if additional current is needed. The remote out-
    put will trigger instantaneously when the
    ADCT4 detects a DC voltage on the white, left + audio input wire
    above 5V or a very low audio signal. The
    A
    A
    D
    D
    C
    C
    T
    T
    4
    4
    will shut off 30 seconds after no signal detected.
    Installation: The ADCT4 should be installed on a stereo’s speaker output wires or the output wires on an
    OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on
    the output of an OEM amplifier, or on the input terminals on the OEM speakers.
    Wire Color & Function: The audio input wire colors are an EIA standard for car stereo applications as
    follows:
    INPUT HARNESS: POWER HARNESS:
    WHITE
    = LEFT Front (+) Input YELLOW = BATTERY +12V Input
    WHITE/BLACK = LEFT Front (-) Input GRAY = POWER (-) GROUND Input
    GRAY = RIGHT Front (+) Input BLUE = REMOTE +12V Output
    GRAY/BLACK = RIGHT Front (-) Input BLACK/WHITE = ReferenceGround(-)
    GREEN = LEFT Rear (+) Input
    GREEN/BLACK = LEFT Rear (-) Input
    PURPLE = RIGHT Rear (+) Input
    PURPLE/BLACK = RIGHT Rear (-) Input
    OUTPUT HARNESS:
    WHITE = LEFT Front (+) Input
    WHITE/BLACK = LEFT Front (-) Input
    GRAY = RIGHT Front + Input
    GRAY/BLACK = RIGHT Front (-) Input
    GREEN = LEFT Rear (+) Input
    GREEN/BLACK = LEFT Rear (-) Input
    PURPLE = RIGHT Rear (+) Input
    PURPLE/BLACK = RIGHT Rear (-) Input
    See back of sheet for adjusting the ADCT4
    for maximum performance
    NOTE: Be sure that all audio input connections
    are polarized or in phase with each other. That is,
    the positive output wires from the audio source
    need to be connected to the corresponding posi-
    tive input wires of the
    ADCT4. The same goes for
    the negative audio wires. Failure to do this will
    result in poor bass response and low quality
    audio.
    11--880000--222211--00993322 RREEVV.. 0044//0022//0088 wwwwww..mmeettrraaoonnlliinnee..ccoomm IINNSSTTAADDCCTT44
    ©© CCOOPPYYRRIIGGHHTT 22000088 MMEETTRRAA EELLEECCTTRROONNIICCSS CCOORRPPOORRAATTIIOONN
    ADCT4
    44 CChhaannnneell,, AAddjjuussttaabbllee,,
    LLiinnee OOuuttppuutt CCoonnvveerrtteerr ((LLOOCC))
    wwiitthh BBuuiilltt--iinn AAmmpplliiffiieerr RReemmoottee GGeenneerraattoorr
    The ADCT4 is is designed to convert 4 channels of speaker level audio into 4 channels of line level audio
    that can be used by OEM amplifiers. It can also be used with OEM radios to add aftermarket amplifiers;
    the optional DC4-RCA harness is required. This device will also detect the presence of an audio signal and
    then generate a +12V output (verified by an illuminated LED) that can be used to turn-on an aftermarket
    amplifier.
    Features & Specifications: : The ADCT4 is able to handle 80 watts per channel continuous input with-
    out over heating. The input circuitry is designed to correct the crossover distortion commonly found on
    standard LOCs while providing a high to low level step down of 6:1. Output audio level is infinitely
    adjustable using the onboard, high quality potentiometers. The remote output or amplifier trigger is rated
    at 500mA (+12V) and will easily handle an outboard relay if additional current is needed. The remote out-
    put will trigger instantaneously when the
    ADCT4 detects a DC voltage on the white, left + audio input wire
    above 5V or a very low audio signal. The
    A
    A
    D
    D
    C
    C
    T
    T
    4
    4
    will shut off 30 seconds after no signal detected.
    Installation: The ADCT4 should be installed on a stereo’s speaker output wires or the output wires on an
    OEM amplifier of up to 80 watts per channel. These wires can be found behind the stereo in the dash, on
    the output of an OEM amplifier, or on the input terminals on the OEM speakers.
    Wire Color & Function: The audio input wire colors are an EIA standard for car stereo applications as
    follows:
    INPUT HARNESS: POWER HARNESS:
    WHITE
    = LEFT Front (+) Input YELLOW = BATTERY +12V Input
    WHITE/BLACK = LEFT Front (-) Input GRAY = POWER (-) GROUND Input
    GRAY = RIGHT Front (+) Input BLUE = REMOTE +12V Output
    GRAY/BLACK = RIGHT Front (-) Input BLACK/WHITE = ReferenceGround(-)
    GREEN = LEFT Rear (+) Input
    GREEN/BLACK = LEFT Rear (-) Input
    PURPLE = RIGHT Rear (+) Input
    PURPLE/BLACK = RIGHT Rear (-) Input
    OUTPUT HARNESS:
    WHITE = LEFT Front (+) Input
    WHITE/BLACK = LEFT Front (-) Input
    GRAY = RIGHT Front + Input
    GRAY/BLACK = RIGHT Front (-) Input
    GREEN = LEFT Rear (+) Input
    GREEN/BLACK = LEFT Rear (-) Input
    PURPLE = RIGHT Rear (+) Input
    PURPLE/BLACK = RIGHT Rear (-) Input
    See back of sheet for adjusting the ADCT4
    for maximum performance
    NOTE: Be sure that all audio input connections
    are polarized or in phase with each other. That is,
    the positive output wires from the audio source
    need to be connected to the corresponding posi-
    tive input wires of the
    ADCT4. The same goes for
    the negative audio wires. Failure to do this will
    result in poor bass response and low quality
    audio.
    11--880000--222211--00993322 RREEVV.. 0044//0022//0088 wwwwww..mmeettrraaoonnlliinnee..ccoomm IINNSSTTAADDCCTT44
    ©© CCOOPPYYRRIIGGHHTT 22000088 MMEETTRRAA EELLEECCTTRROONNIICCSS CCOORRPPOORRAATTIIOONN

Máte otázku týkajúcu sa Metra AX-ADCT4?

Počet otázok: 0

Tu sa jednoducho opýtajte na otázku, ktorú máte ohľadom Metra AX-ADCT4 od ostatných vlastníkov produktov. Poskytnite jasný a komplexný popis problému a vašej otázky. Čím bude lepšie opísaný váš problém a otázka, tým ľahšie bude pre ostatných Metra AX-ADCT4 vlastníkov, poskytnúť vám správnu odpoveď.

Tu si zobrazte bezplatne Metra AX-ADCT4 príručku. Už ste si prečítaly príručku, ale nezodpovedala vám vašu otázku? Položte svoju otázku na tejto stránke ostatným Metra AX-ADCT4 vlastníkom. Tu položte otázku

Produktové špecifikácie

Všeobecné
Značka Metra
Model AX-ADCT4
Výrobok Súprava do auta
EAN 86429223213
Jazyk Engels
Typ súboru PDF
Technické detaily
Výstupný výkon 6 W
Výstupné napätie 12 V
Možnosti pripojenia
Technológia prepojenia Kábel
Farba
Farba Viacfarebný
Vlastnosti
Farba Viacfarebný

príručky.sk

Hľadáte príručku? príručky.sk zaistí, že nájdete príručku, ktorú hľadáte, ihneď. Naša databáza obsahuje viac ako 1 milión PDF príručiek od viac ako 10 000 značiek. Každý deň pridávame najnovšie príručky, aby ste vždy našli produkt, ktorý hľadáte. Je to veľmi jednoduché: stačí do vyhľadávacieho panela napísať názov značky a typ produktu a okamžite si môžete bezplatne a online prezrieť príručku podľa svojho výberu.

príručky.sk

© Autorské práva 2021 príručky.sk. Všetky práva vyhradené.