Xit XTCG5DIII príručka

(1)
  • Protective cover
    Electrical contacts
    Camera battery compartment
    cover slot
    Vertical-grip operation switch
    Vertical-grip AE start button
    Vertical-grip AE lock/FE lock/Index
    reduce button
    Vertical-grip AF point selection/
    Magnify button
    Battery release lever
    Battery compartment
    INSTRUCTIONS
    Thank you for purchasing Xit Product.
    The XTCG5DIII is a battery grip that can hold two Battery Packs LP-E6
    or six size-AA/LR6 batteries. It is also equipped with a vertical-grip
    shutter button, Main Dial, etc. to enable shooting in the same way
    as a horizontal grip.
    ATTACHING TO THE CAMERA
    1. Remove the battery from the camera (Fig. 1).
    2. Detach the camera's battery compartment cover
    3. Insert the detached cover into its storage slot to ensure that it will
    not be lost(Fig. 3).
    4. Remove the protective cover, and then insert the electrical contacts
    into the battery compartment (Fin. 4-1).
    5. Align the attachment screw with the camera's tripod socket, and then
    turn the attach/detach knob to tighten securely to the camera (Fig. 4-2)
    - Be sure to attach the battery grip to the camera before inserting
    the batteries. The results of the battery check may not be
    displayed properly if you attach the battery grip to the camera
    with the batteries already inside.
    - Before removing the battery grip from the camera, be sure to
    turn the camera's power switch to <OFF>, and take out the
    batteries. After removing the batteries, attach the protective
    cover to the electrical contacts.
    INSERTING THE BATTERY PACKS
    1. Slide the lever as shown by the arrow and open the cover (Fig. 5)
    2. Press both release levers outward in the battery compartment, and
    remove the battery magazine (Fig. 6).
    3. Insert one or two Battery Packs LP-E6 in the orientation shown on
    the battery compartment cover (Fig. 7).
    4. Close the battery compartment cover until it clicks into place.
    - If only one battery pack is used, it may be inserted in either the
    right or left sides.
    - lf two battery packs are inserted, power is supplied
    simultaneously by both battery packs. Two battery packs with
    dierent charging levels can be inserted and used without any
    problems.
    - Remove the battery packs from the battery grip when the
    camera will not be used for an extended period.
    1. Insert the batteries into the Battery Magazine XTCG5DIII (Fig. 8).
    Make sure the + and - battery contacts are properly oriented as
    shown in the illustration.
    2. Turn over the battery magazine so that the inserted batteries are
    facing downward, and then insert the battery magazine until the
    release lever locks into place (Fig. 9).
    3. Close the battery compartment cover until it clicks into place.
    INSERTING SIZE-AA/LR6 BATTERIES
    - Fewer images can be shot when using size-AA/LR6 batteries.
    Also, fewer images can be shot depending on the battery brand
    and storage conditions, and so usage of size-AA/LR6 batteries
    is recommended only for emergencies.
    - With size-AA/LR6 batteries, use six new batteries of the same
    brand at temperatures above 20°C/68°F. The camera may
    not function when used in low temperatures or old and new
    batteries are used together.
    USING THE BATTERY GRIP
    - Turning the vertical-grip operation switch to <ON> (Fig. 10) makes the
    battery grip buttons and dial function in the same way as those
    on the camera.
    - When shooting in the horizontal-grip position, turn the vertical-grip
    operation switch to <OFF> so that you do not accidentally use the
    buttons or dial on the battery grip.
    BATTERY LIFE
    Temperature: +23°C /0°C 73°F/32°F [Number of shots - approx.]
    Shooting method
    Power supply
    Model
    Possible
    shots
    Viewnder shooting
    EOS 5D
    Mark III
    LP-E6 x 2
    1700/1500
    AA alkaline/LR6 batteries
    300/100
    Live View shooting
    LP-E6 x 2
    400/360
    - Based on ClPA (Camera & Imaging Products Association) testing standards,
    the number of images that can be shot is reduced by holding the shutter
    button halfway down for an extended time, and using the AF
    frequently without shooting.
    - The number of images that can be shot is reduced by frequent usage
    of the LCD monitor.
    - The battery level can be checked on the LCD panel of the camera and
    in the viewnder.
    SPECIFICATIONS
    Type: Battery grip for the EOS 5D Mark Ill
    Power sources: (1) One or two Battery Packs LP-E6
    (2)AA alkaline/LR6 batteries x 6
    Power switch: Camera's power switch
    Working temperature range: 0°C - +40°C / 32°F - 104°F
    Working humidity: 85% or less
    Dimensions: 149.1 (W) x 114.3 (H) x 76.3 (D) mm/
    5.9 (W) x 4.5 (H) x3.0 (D) in.
    Weight: Approx. 315 g / 11.1 oz.
    (not including the power
    supply or battery magazine)
    PART NAMES
    1
    2
    3
    4
    5
    6
    7
    8
    9
    Battery compartment cover
    DC coupler cord mount
    Attach/detach knob
    Guide pin
    Attachment screw
    Battery compartment release lever
    Vertical-grip shutter button
    Vertical-grip Main Dial
    Hand strap mount
    Tripod socket
    Battery magazine XTCG5DIII
    10
    11
    12
    13
    14
    15
    16
    17
    18
    19
    20
    Canon
    designed for
    Item # XTCG5DIII

Máte otázku týkajúcu sa Xit XTCG5DIII?

Počet otázok: 0

Tu sa jednoducho opýtajte na otázku, ktorú máte ohľadom Xit XTCG5DIII od ostatných vlastníkov produktov. Poskytnite jasný a komplexný popis problému a vašej otázky. Čím bude lepšie opísaný váš problém a otázka, tým ľahšie bude pre ostatných Xit XTCG5DIII vlastníkov, poskytnúť vám správnu odpoveď.

Tu si zobrazte bezplatne Xit XTCG5DIII príručku. Už ste si prečítaly príručku, ale nezodpovedala vám vašu otázku? Položte svoju otázku na tejto stránke ostatným Xit XTCG5DIII vlastníkom. Tu položte otázku

Produktové špecifikácie

Všeobecné
Značka Xit
Model XTCG5DIII
Výrobok Ostané príslušenstvo fotoaparátu
EAN 818795012272
Jazyk Engels
Typ súboru PDF
Vlastnosti
Kompatibilita značky Canon
Kompatibilné produkty EOS 5D Mark III
Farba Čierna
Typ produktu Digital camera battery grip
Obsah balenia
Návod na použitie Áno
Batérie
Veľkosť valcovej batérie AA
Typ batérie LP-E6
Počet podporovaných batérií 8

príručky.sk

Hľadáte príručku? príručky.sk zaistí, že nájdete príručku, ktorú hľadáte, ihneď. Naša databáza obsahuje viac ako 1 milión PDF príručiek od viac ako 10 000 značiek. Každý deň pridávame najnovšie príručky, aby ste vždy našli produkt, ktorý hľadáte. Je to veľmi jednoduché: stačí do vyhľadávacieho panela napísať názov značky a typ produktu a okamžite si môžete bezplatne a online prezrieť príručku podľa svojho výberu.

príručky.sk

© Autorské práva 2021 príručky.sk. Všetky práva vyhradené.