Xit XTNG3100 príručka

(1)
  • To ensure proper operation, read this manual thoroughly before using
    this product. After reading, be sure to keep it for future references. The
    XTNG3100 takes one or two EN-EL14 batteries only, especially suitable
    for shooting in a large quantity or low temperatures environment. It
    features a vertical-grip shutter-release button to enable shooting in
    the same fashion as a horizontal grip.
    ATTACHING TO THE CAMERA
    1. Remove the battery from the camera.
    2. Pull out the camera's battery compartment cover at a slanted
    angle to detach. (Fig.2) Perform the operation on a table so as not
    to drop the camera.
    3. Insert the detached cover into its storage slot to ensure that it will
    not be lost. When taking out the cover, press lightly on the cover
    hinge and pull it out upward at a slanted angle.
    4. Remove the protective cover, and then insert the electrical
    contacts into the camera battery compartment. (Fig.3)
    5. Align the attachment screw with the camera's tripod socket, and
    then turn the attach/detach knob to tighten securely. (Fig.4)
    • Do not further push open the battery compartment cover when it is
    already open, doing so may damage its hinge.
    • Be sure to attach the battery grip to the camera before inserting the
    batteries.The results of the battery check may not be displayed properly
    if you attach the battery grip to the camera with the batteries
    already inside.
    • Before removing the battery grip from the camera. Be sure to turn the
    camera's power switch to <OFF>, and take out the batteries. After
    removing the batteries, attach the protective cover to the electrical
    contacts.
    USING THE EN-EL14 BATTERY PACKS
    1. Tweak battery chamber latch, open battery chamber cover. (Fig.5)
    2. Insert the battery grip electrical contacts to camera's battery chamber
    and align the attachment. (Fig.6-1/Fig.6-2)
    3. Screw with the camera's tripod socket, then turn the attach/detach
    knob to tighten securely.
    4. After the installation is completed, turn on the camera, and make sure
    that the camera's LCD displays the figures.
    5. To dispatch the battery grip, reverse the above steps. (Fig.7)
    CAUTION
    The battery grip is not waterproof.
    Never attempt to disassemble or repair the product yourself. The
    battery grip warranty does not cover any malfunction resulted
    from such actions.
    Make sure that the battery is turned OFF when attaching the
    battery grip. Batteries must be inserted accordingly (refer to the
    polarity guide [+][-] shown).
    Remove the batteries from the battery grip when the camera is
    not to be used for an extended period.
    Do not short-circuit the battery grip with batteries installed.
    Do not carry or store the battery grip with the batteries installed
    together with metallic objects.
    BATTERY STATUS
    Check the batteries capacity provided on the cameras LCD panel
    Shooting Condition
    Temperature
    Two EN-EL14 battery
    No ash use
    Two EN-EL14 battery
    50% ash use
    Low temperature
    0°C
    Normal temperature
    20°C
    Approx. 3500
    Approx. 1800
    Approx. 2000
    Approx. 1500
    All data are based on manufacturer’s standard test results. Specication and
    design are subject to change without notice.
    PART NAMES
    1.Battery Chamber latch
    2.Battery Chamber cover
    3.Attachment Wheel
    4.Mounting screw
    5.Power terminals
    6.Grip electrical pole
    7.Tripod Socket
    8.Signal transfer
    9.Vertical-grip shutter button
    10.Camera battery chamber cover storage area.
    Item # XTNG3100
    Nikon
    designed for

Máte otázku týkajúcu sa Xit XTNG3100?

Počet otázok: 0

Tu sa jednoducho opýtajte na otázku, ktorú máte ohľadom Xit XTNG3100 od ostatných vlastníkov produktov. Poskytnite jasný a komplexný popis problému a vašej otázky. Čím bude lepšie opísaný váš problém a otázka, tým ľahšie bude pre ostatných Xit XTNG3100 vlastníkov, poskytnúť vám správnu odpoveď.

Tu si zobrazte bezplatne Xit XTNG3100 príručku. Už ste si prečítaly príručku, ale nezodpovedala vám vašu otázku? Položte svoju otázku na tejto stránke ostatným Xit XTNG3100 vlastníkom. Tu položte otázku

Produktové špecifikácie

Všeobecné
Značka Xit
Model XTNG3100
Výrobok Ostané príslušenstvo fotoaparátu
EAN 818795011084
Jazyk Engels
Typ súboru PDF
Vlastnosti
Kompatibilita značky Nikon
Kompatibilné produkty D3100/D3200
Farba Čierna
Typ produktu Digital camera battery grip
Obsah balenia
Návod na použitie Áno
Batérie
Typ batérie EN-EL14
Počet podporovaných batérií 2

príručky.sk

Hľadáte príručku? príručky.sk zaistí, že nájdete príručku, ktorú hľadáte, ihneď. Naša databáza obsahuje viac ako 1 milión PDF príručiek od viac ako 10 000 značiek. Každý deň pridávame najnovšie príručky, aby ste vždy našli produkt, ktorý hľadáte. Je to veľmi jednoduché: stačí do vyhľadávacieho panela napísať názov značky a typ produktu a okamžite si môžete bezplatne a online prezrieť príručku podľa svojho výberu.

príručky.sk

© Autorské práva 2021 príručky.sk. Všetky práva vyhradené.