14) Control lock 15) Sub-command dial 16) Tripod socket 17) XTNG600 holder for EN-EL15 batteries
18) Power terminaIs 19) Power terminals (XTNG600 battery holder) 20) XTNG600 holder for AA batteries
21 ) Power terminaIs (XTNG600 battery holder).
■ The XTNG600 Shutter-Release Button,Multi Selector,Command Dials,and AE-L/AF-L Button
The XTNG600 is equipped with a shutter-release button (Figure A-13), multi selector (Figure A-6),main
command diaI (Figure A-5), sub-command dial (Figure A-15),and AE-L/AF-L button (Figure A-4) for use
when taking photographs in vertical (“tall,” or portrait) orientation. These controls perform the same functions
as the correspond-ing controls on the camera and are affected by changes to options in the Custom
Settings menu (Group f) that affect these camera controls. See the camera manual for more information.
■ The XTNG600 Control Lock
The control lock (Figure A-14) locks the controls on the
XTNG600 to prevent unin-tended use. Before using these
controls to take photographs in vertical (portrait)
orientation,release the lock as shown at right.
The control lock is not a power switch.Use the camera power
switch to turn the Camera on and off.
■ Parts of the XTNG600 (Figure A)
Pro Series Battery Grip
Nikon
D600
designed for
■ Using the Battery Pack
Attaching the Battery Pack
Before attaching the battery pack, be sure that the camera is off and that the XTNG600 control lock (Figure
A-14) is in the L position (the illustrations show the D600).
1 Remove the contact cap (Figure A-1) from the battery pack.
2 The contacts for the XTNG600 are in the base of the camera, where they are pro-tected by a contact
cover. Remove the contact cover as shown in Figure B-1 and place it in the contact cover holder on the
XTNG600 (Figure B-2).
Whatsapp
Mail
Facebook
Máte otázku týkajúcu sa Xit XTNG600?
Počet otázok: 0
Tu sa jednoducho opýtajte na otázku, ktorú máte ohľadom Xit XTNG600 od ostatných vlastníkov produktov.
Poskytnite jasný a komplexný popis problému a vašej otázky. Čím bude lepšie opísaný váš problém a otázka, tým ľahšie bude pre ostatných Xit XTNG600 vlastníkov, poskytnúť vám správnu odpoveď.
Informácie o Xit XTNG600
+2
Tu si zobrazte bezplatne Xit XTNG600 príručku. Už ste si prečítaly príručku, ale nezodpovedala vám vašu otázku? Položte svoju otázku na tejto stránke ostatným Xit XTNG600 vlastníkom. Tu položte otázku
Item # XTNG600Thank you for your purchase of an XTNG600 multi-power battery pack for use with all Nikon single-lensreflex digital cameras that Iist the XTNG600 as a compatible accessory in the camera manuaI.TheXTNG600 takes one EN-EL15 recharge-able battery or six AA batteries (alkaline,Ni-MH, or lithium) andincludes an alternate shutter-reIease button, AE-L/AF-L button, multi selector, and main and sub-commanddiaIs for taking pictures in “tall” (portrait) orientation. Camera menu options allow the user to choose whetherthe camera battery or the batteries in the XTNG600 are used first; see the camera manual for details.3 Position the XTNG600,keeping the XTNG600 mounting screw (Figure C-2) aligned with the camera tripodsocket (Figure C-1) and tighten the attachment wheel by rotating it in the direction shown by the LOCKarrow (Figure D). There is no need to remove the battery from the camera before connecting the XTNG600.At default settings, the battery inserted in the camera will be used only after the battery in the XTNG600is exhausted. The Battery order option in the camera Custom Settings menu (Group d) can be used tochange the order in which the batteries are used.■ Removing the Battery PackTo remove the XTNG600, turn the cam-era off and set the control lock on the XTNG600 to L, then loosenthe attachment wheel and remove the XTNG600. Be sure to replace the contact cover on the cam-era andthe contact Cap on the XTNG600 when the battery pack is not in use.Be sure to pIace the camera contact cover in the contact cover holder and to keep the XTNG600 contactcap in a safe pIace to prevent loss.■ Inserting BatteriesThe XTNG600 can be used with one EN-EL15 rechargeable Li-ion battery or with six AA batteries.Before inserting batteries, be sure that the camera is off and that the XTNG600 control lock is in the Lposition.1 Turn the XTNG600 battery-chamber latch to and remove the battery holder (Figure E).2 Ready the batteries as described below.EN-EL15:Matching the indentations on the battery to the projections on the XTNG600 holder, insert thebattery with the arrow (▲) on the battery toward the battery holder power terminals (Figure F-1). Press thebattery lightly downward and slide it in the direction of che arrow until the power terminals click into place(Figure F-2)．AA batteries: Place six AA batteries in the XTNG600 battery holder as shown in Figure G, making sure thatthe batteries are in the correct orientation.3 Insert the battery holder in the XTNG600 and latch the battery-chamber cover (Figure Ha).Make sure theholder is fully inserted before turning the latch.4 Turn the camera on and check the battery leveI in the control panel or viewfinder. If the camera does notturn on, check that the battery is correctly inserted.The EP-5B Power ConnectorWhen using the EP-5B power connector, insert it into the XTNG600 holder with the arrow (▲) on theconnector toward the battery power terminals. Press the connector lightly downward and slide it in thedirection of the arrow until the power terminals click into place (Figure lay).Open the holder power connectorcover and pass the EP-5B power cable through the opening (Figure I-2)．■ Removing BatteriesBe careful not to drop batteries or the holder.1 Turn the XTNG600 battery-chamber latch and remove the battery holder (Figure E).2 Remove the battery or batteries from the holder.EN-EL15While pressing the holder PUSH button, slidethe battery towards the button.The battery canthen be removed as shown.AA BatteriesRemove the batteries as shown. Be careful notto drop the batteries when removing them fromthe holder.■ SpecificationsPower source: One EN-EL15 rechargeable Li-ion battery, six LR6 aIkaline, HR6 Ni-MH, or FR6 lithium AA batteries,or EH-5b/EH-5a/EH-5 AC adapter (requires EP-5B power connector)Operating temperature: 0-40℃ (32 – 104℉)Dimensions (W x Ha x D): Approx. 143×49.5×78 mmWeight: Approx.350 g ( 12.3 oz) with XTNG600 and optional EN-EL15 batteryApprox. 405 g (14.3 oz) with XTNG600 and six AA batteries(available separately from third-party suppliers)Approx.290 g (10.2 oz) with XTNG600 and optional EP-5B power connectorApprox.265 g (9.3 oz) with XTNG600Approx.265 g (9.3 oz) with XTNG600● Specifications and design are subject to change without notice.The procedure for removing the EP-5B powerconnector is the same as that for the EN-EL15.Thank you for your purchase of an XTNG600 multi-power battery pack for use with all Nikon single-lensreflex digital cameras that Iist the XTNG600 as a compatible accessory in the camera manuaI.TheXTNG600 takes one EN-EL15 recharge-able battery or six AA batteries (alkaline,Ni-MH, or lithium) andincludes an alternate shutter-reIease button, AE-L/AF-L button, multi selector, and main and sub-commanddiaIs for taking pictures in“tall” (portrait) orientation. Camera menu options allow the user to choose whetherthe camera battery or the batteries in the XTNG600 are used first; see the camera manual for details.1) Contact cap 2) Holder for camera contact cover 3) Power/signal contacts 4)AE-L/AF-L button 5)Maincommand dial 6) Multi selector 7)Attachment wheel 8)Holder power connector cover 9)Battery-chambercover 10) Battery chamber 11) Battery-chamber latch 12) Mounting screw 13) Shutter-release button14) Control lock 15) Sub-command dial 16) Tripod socket 17) XTNG600 holder for EN-EL15 batteries18) Power terminaIs 19) Power terminals (XTNG600 battery holder) 20) XTNG600 holder for AA batteries21 ) Power terminaIs (XTNG600 battery holder).■ The XTNG600 Shutter-Release Button,Multi Selector,Command Dials,and AE-L/AF-L ButtonThe XTNG600 is equipped with a shutter-release button (Figure A-13), multi selector (Figure A-6),maincommand diaI (Figure A-5), sub-command dial (Figure A-15),and AE-L/AF-L button (Figure A-4) for usewhen taking photographs in vertical (“tall,” or portrait) orientation. These controls perform the same functionsas the correspond-ing controls on the camera and are affected by changes to options in the CustomSettings menu (Group f) that affect these camera controls. See the camera manual for more information.■ The XTNG600 Control LockThe control lock (Figure A-14) locks the controls on theXTNG600 to prevent unin-tended use. Before using thesecontrols to take photographs in vertical (portrait)orientation,release the lock as shown at right.The control lock is not a power switch.Use the camera powerswitch to turn the Camera on and off.■ Parts of the XTNG600 (Figure A)Pro Series Battery GripNikonD600designed for■ Using the Battery PackAttaching the Battery PackBefore attaching the battery pack, be sure that the camera is off and that the XTNG600 control lock (FigureA-14) is in the L position (the illustrations show the D600).1 Remove the contact cap (Figure A-1) from the battery pack.2 The contacts for the XTNG600 are in the base of the camera, where they are pro-tected by a contactcover. Remove the contact cover as shown in Figure B-1 and place it in the contact cover holder on theXTNG600 (Figure B-2).
