The default setting is SSI Host. If you use Serial Host, scan the
Enable Serial Host
(No Variant) barcode at right before use.
If you use Serial Host, your RS232 software, such as Windows HyperTerminal,
can receive data from the scanner.
Enable Serial Host (No Variant)
1.2 SSI Host
The default setting is SSI Host. If you use SSI host, your host device can transmit data
to software like Windows Notepad or Word. Follow the steps below to start using.
1.
Connect the scanner serial cable to the host computer and connect a +5V power
adapter to the DC jack on the cable. The scanner would give a "Do Re Mi"
melody
when powered on.
2. Read the SSI Host barcode at right to set up interface. (Skip this step
if you are
using the default setting.)
3. Execute KeySimulator.exe in the Manual CD after the computer detects
the
scanner.
4.
Choose a COM port number and click “Send Return” (Figure 1).
5.
Click “Start” to complete the setup procedure (Figure 1).
SSI Host
Figure 1
Whatsapp
Mail
Facebook
Máte otázku týkajúcu sa Zebex Z-3152SR?
Počet otázok: 0
Tu sa jednoducho opýtajte na otázku, ktorú máte ohľadom Zebex Z-3152SR od ostatných vlastníkov produktov.
Poskytnite jasný a komplexný popis problému a vašej otázky. Čím bude lepšie opísaný váš problém a otázka, tým ľahšie bude pre ostatných Zebex Z-3152SR vlastníkov, poskytnúť vám správnu odpoveď.
Informácie o Zebex Z-3152SR
+3
Tu si zobrazte bezplatne Zebex Z-3152SR príručku. Už ste si prečítaly príručku, ale nezodpovedala vám vašu otázku? Položte svoju otázku na tejto stránke ostatným Zebex Z-3152SR vlastníkom. Tu položte otázku
IntroductionThis Quick StartGuide applies toadvanced 2D image readers. Thevaried models include handheld,hands-free and module.All modelsare capable of decoding 1D and 2Dbarcode symbologies.The scanner must be properlypowered before programming.Duringthe programming mode, the scannerwill acknowledge a good and validreading with a short beep.Otherwise,thescanner will remain silent forinvalid scanning.The barcodes hereinonly preparesyou ready to use the scanner. Fordetailed programming instructions andsafety notices please refer to thecomplete Programming Guidein themanual CD.If you can’t find the manual CD, pleasecontact your distributor.Laser SafetyThe devices using lasers comply withUS 21CFR1040.10 and 1040.11except for deviations pursuant toLaser Notice No. 50 dated July 26,2002 and IEC608525-1:+A1:1997+A2:2001.The laser classification is marked onone of the labels on the devices.Avoid long term staring into directlaser lightto prevent damage to usereyes.Copyright © 2011. All rights reserved.◎◎◎◎ Default Factory Device SettingParameter Default-Level (for handheld/hands-free scanner)Trigger Mode-Presentation (for scan module)Serial Host Type SSI HostUSB Device Type HID Keyboard EmulationUSB Country Keyboard TypeNorth American* Level ModeA trigger event activates decode processing,which continues until the trigger event ends, avalid decode, or the decode session time-out isreached.* Presentation ModeWhen the device detects an object in its field ofview it triggers and attempts to decode.1. Using Serial Interface1.1 Serial HostThe default setting is SSI Host. If you use Serial Host, scan theEnable Serial Host(No Variant) barcode at right before use.If you use Serial Host, your RS232 software, such as Windows HyperTerminal,can receive data from the scanner.Enable Serial Host (No Variant)1.2 SSI HostThe default setting is SSI Host. If you use SSI host, your host device can transmit datato software like Windows Notepad or Word. Follow the steps below to start using.1.Connect the scanner serial cable to the host computer and connect a +5V poweradapter to the DC jack on the cable. The scanner would give a "Do Re Mi"melodywhen powered on.2. Read the SSI Host barcode at right to set up interface. (Skip this stepif you areusing the default setting.)3. Execute KeySimulator.exe in the Manual CD after the computer detectsthescanner.4.Choose a COM port number and click “Send Return” (Figure 1).5.Click “Start” to complete the setup procedure (Figure 1).SSI HostFigure 1
